Hayes Brake

Turf Care

Products

1-35-1S

Hydraulic Brake Caliper

Features
  • Capable of 2200 lbs. of clamp force
  • Lightweight Cast Aluminum
  • Can be mounted in most currently available 8” wheels
  • Right or left hand inlet locations
  • Patented rubber vibration dampening pad on floating rail
  • Four bleeder or inlet locations
Specifications
Type
Hydraulic Brake Caliper
Construction Material
Lightweight Cast Aluminum
Piston(s)
2-Piston: Aluminum 1.372 in. (34.84 mm)
Clamp Force (max.)
2200 lbs. @ 1500 PSI
Maximum Hydraulic Pressure
1500 PSI
Fluid Dispersement @ 1500 PSI
0.033 cu. in.
Fluid Type
Brake Fluid (DOT 3, 4, 5, 5.1) & Hydraulic
Fluid Inlet
3/8 – 24 thread with 3/16″ inverted flare
Total Lining Area
5.5 sq. in.
Usable Lining Thickness Per Pad
0.125 in.
Lining Type
Organic or Sintered
Mount
Adjust w/ Bracket
Rotor Diameter
6.0 – 10.0 in.
Rotor Thickness
0.187 – 0.250 in.
Finish
Natural, Paint or Anodize
Weight
3.1 lbs. (4763 g)

1-41-1S

Hydraulic Brake Caliper

Features
  • Capable of 3100 lbs. of clamp force
  • Lightweight cast aluminum housing
  • Square seal piston retraction for constant running clearance
  • Three bleeder and inlet options for mount flexibility
  • Available for either hydraulic or brake fluid application
  • Various brackets available
Specifications
Type
Hydraulic Brake Caliper
Construction Material
Lightweight Cast Aluminum
Piston(s)
1-Piston: Aluminum 1.622 in. (41.20 mm)
Clamp Force (max.)
3100 lbs. @ 1500 PSI
Maximum Hydraulic Pressure
1500 PSI
Fluid Dispersement @ 1500 PSI
0.081 cu. in.
Fluid Type
Brake Fluid (DOT 3, 4, 5, 5.1) & Hydraulic
Fluid Inlet
3/8 – 24 thread with 3/16″ inverted flare
Total Lining Area
7.30 sq. in.
Usable Lining Thickness Per Pad
0.175 in.
Lining Type
Organic or Sintered
Mount
Adjust w/ Bracket
Rotor Diameter
6.0 – 20.0 in.
Rotor Thickness
0.100 – 0.375 in.
Finish
Natural, Paint or Anodize
Weight
4.0 lbs. (1814 g)

2-41-1S

Hydraulic Brake Caliper

Features
  • Capable of 3100 lbs. of clamp force
  • Lightweight cast aluminum housing
  • Choice of side fix mount lugs or top mount bracket
  • Utilizes internal transfer port with o-ring seal
  • Square seal piston retraction for constant running clearance
  • Three bleeder and inlet location options
  • Available for either hydraulic or brake fluid application
Specifications
Type
Hydraulic Brake Caliper
Construction Material
Lightweight Cast Aluminum
Piston(s)
2-Piston: Aluminum 1.622 in. (41.20 mm)
Clamp Force (max.)
3100 lbs. @ 1500 PSI
Maximum Hydraulic Pressure
1500 PSI
Fluid Dispersement @ 1500 PSI
0.161 cu. in.
Fluid Type
Brake Fluid (DOT 3, 4, 5, 5.1) & Hydraulic
Fluid Inlet
3/8 – 24 thread with 3/16″ inverted flare
Total Lining Area
7.30 sq. in.
Usable Lining Thickness Per Pad
0.175 in.
Lining Type
Organic or Sintered
Mount
Adjust w/ Bracket
Rotor Diameter
6.0 – 20.0 in.
Rotor Thickness
0.100 – 0.375 in.
Finish
Natural, Paint or Anodize
Weight
4.0 lbs. (1814 g)

210M

Mechanical Brake Caliper

Features
  • Capable of 300 lbs. of clamp force
  • Lightweight two-piece cast aluminum housing
  • Floating or fixed mount bracket
  • Cable or push rod actuation
  • Organic or sintered pads
  • Easily adapted to various rotor thicknesses
  • Clockwise (CW) and counter clockwise (CCW) lever actuation
Specifications
Type
Mechanical Brake Caliper
Construction Material
Lightweight Cast Aluminum
Clamp Force (max.)
300 lbs.
Maximum Lever Force @ 1.81″ Hole
75 lbs.
Lever Positions
45 in. increments
Total Lining Area
1.68 sq. in.
Usable Lining Thickness Per Pad
0.125 in.
Lining Type
Organic or Sintered
Mount
Floating or Fixed Bracket
Rotor Diameter
4.0 in. and up
Rotor Thickness
0.120 – 0.195 in.
Finish
Natural, Paint or Anodize
Weight
1.1 lbs. (499 g)

310M

Mechanical Brake Caliper

Features
  • Capable of 400 lbs. of clamp force
  • Economical design ideal for low torque applications
  • Zinc finish resists rust and corrosion
  • Floating or fixed mount bracket
  • Clockwise (CW) and counter clockwise (CCW) lever actuation
Specifications
Type
Mechanical Brake Caliper
Construction Material
Zinc Plated Heat-Treated Steel
Clamp Force (max.)
400 lbs.
Maximum Lever Force @ 1.81″ Hole
150 lbs.
Lever Positions
0, 45, 120, 180, 225, 300 degrees
Total Lining Area
4.875 sq. in.
Usable Lining Thickness Per Pad
0.100 in.
Lining Type
Organic
Mount
Floating or Fixed Bracket
Rotor Diameter
4.5 – 5.0 in.
Rotor Thickness
0.156 – 0.188 in.
Finish
Zinc
Weight
1.0 lbs. (454 g)

400M

Mechanical Brake Caliper

Features
  • Capable of 1000 lbs. of clamp force
  • Lightweight two-piece cast aluminum housing
  • Floating or fixed mount bracket
  • Cable or push rod actuation
  • Organic pads
  • Easily adapted to various rotor thicknesses
  • Clockwise (CW) and counter clockwise (CCW) lever actuation
Specifications
Type
Mechanical Brake Caliper
Construction Material
Lightweight Cast Aluminum
Clamp Force (max.)
1000 lbs.
Maximum Lever Force @ 1.81″ Hole
150 lbs.
Lever Positions
45 degree increments
Total Lining Area
3.5 sq. in.
Usable Lining Thickness Per Pad
0.14 in.
Lining Type
Organic
Mount
Floating or Fixed Bracket
Rotor Diameter
6.0 – 15.0 in.
Rotor Thickness
0.120 – 0.250 in.
Finish
Natural, Paint or Anodize
Weight
2.0 lbs. (907 g)

M50

Mechanical Brake Caliper

Features
  • Capable of 5000 lbs. clamp force
  • One-piece cast iron housing
  • Efficient ball ramp actuation
  • Sealed actuation mechanism
  • Designed to mount in a 10″ in. wheel
  • Patented centering design maximizes pad life
  • Clockwise (CW) and counter clockwise (CCW) lever actuation
Specifications
Type
Mechanical Brake Caliper
Construction Material
Cast Iron Housing
Clamp Force (max.)
5000 lbs.
Maximum Lever Force @ 3.46″ Hole
216 lbs.
Maximum Lever Stroke
120 degrees
Lever Positions
N/A
Total Lining Area
5.52 sq. in.
Usable Lining Thickness Per Pad
0.090 in.
Lining Type
Organic
Mount
Floating
Rotor Diameter
7.0 – 8.0 in.
Rotor Thickness
0.125 – 0.188 in.
Finish
Natural or Paint
Weight
4.25 lbs. (1928 g)

600M

Mechanical Brake Caliper

Features
  • Capable of 5000 lbs. clamp force
  • Lightweight cast aluminum housing
  • Designed for quick change friction pads
  • Unique dual mounting lugs permit either fixed or floating mount
  • Quick rise on cam for maximum lever efficiency
  • Push pin to housing seals
  • Clockwise (CW) and counter clockwise (CCW) lever actuation
Specifications
Type
Mechanical Brake Caliper
Construction Material
Lightweight Cast Aluminum
Clamp Force (max.)
5000 lbs.
Maximum Lever Force @ 4.375″ Hole
500 lbs.
Maximum Lever Force @ 3.750″ Hole
583 lbs.
Lever Positions
30 degree increments
Total Lining Area
8.6 sq. in.
Usable Lining Thickness Per Pad
0.30 in.
Lining Type
Organic or Sintered
Mount
Floating or Fixed
Rotor Diameter
10.0 – 30.0 in.
Rotor Thickness
0.375 – 0.500 in.
Finish
Natural, Paint or Anodize
Weight
6.0 lbs. (2722 g)

610M

Mechanical Brake Caliper

Features
  • Capable of 7000 lbs. clamp force
  • Cast nodular iron housing
  • Designed for quick change friction pads
  • Unique dual mounting lugs permit either fixed or floating mount
  • Quick rise on cam for maximum lever efficiency
  • Clockwise (CW) and counter clockwise (CCW) lever actuation
Specifications
Type
Mechanical Brake Caliper
Construction Material
Cast Iron Housing
Clamp Force (max.)
7000 lbs.
Maximum Lever Force @ 4.375″ Hole
700 lbs.
Maximum Lever Force @ 3.750″ Hole
816 lbs.
Lever Positions
30 degree increments
Total Lining Area
9.0 sq. in.
Usable Lining Thickness Per Pad
0.29 in.
Lining Type
Organic or Sintered
Mount
Floating or Fixed
Rotor Diameter
10.0 – 30.0 in.
Rotor Thickness
0.375 – 1.0 in.
Finish
Natural or Paint
Weight
13.75 lbs. (6237 g)

1100M

Mechanical Brake Caliper

Features
  • Capable of 900 lbs. of clamp force
  • Economical design ideal for low torque applications
  • Zinc finish resists rust and corrosion
  • Large friction area for extended pad life
  • Floating or fixed mount bracket
  • Clockwise (CW) and counter clockwise (CCW) lever actuation
Specifications
Type
Mechanical Brake Caliper
Construction Material
Zinc Plated Heat-Treated Steel
Clamp Force (max.)
900 lbs.
Maximum Lever Force @ 2.10″ Hole
300 lbs.
Lever Positions
0 or 180 degrees
Total Lining Area
11 sq. in.
Usable Lining Thickness Per Pad
0.130 in.
Lining Type
Organic
Mount
Floating or Fixed Bracket
Rotor Diameter
5.0 – 8.0 in.
Rotor Thickness
0.156 – 0.188 in.
Finish
Zinc
Weight
2.73 lbs. (1238 g)

2510M

Mechanical Brake Caliper

Features
  • Capable of 2500 lbs. of clamp force
  • Economical design ideal for low torque applications
  • Zinc finish resists rust and corrosion
  • Large friction area for extended pad life
  • Floating or fixed mount bracket
  • Clockwise (CW) and counter clockwise (CCW) lever actuation
Specifications
Type
Mechanical Brake Caliper
Construction Material
Zinc Plated Heat-Treated Steel
Clamp Force (max.)
2500 lbs.
Maximum Lever Force @ 4.0″ Hole
200 lbs.
Lever Positions
0 – 180 degrees
Total Lining Area
11 sq. in.
Usable Lining Thickness Per Pad
0.130 in.
Lining Type
Organic
Mount
Floating or Fixed Bracket
Rotor Diameter
5.0 – 8.0 in.
Rotor Thickness
0.156 – 0.375 in.
Finish
Zinc
Weight
2.8 lbs. (1270 g)

M15 WM (8″ & 10″ Wheels)

Mechanical Brake Caliper

Features
  • Capable of 1450 lbs. clamp force
  • Maximum of 2500 lbs. – in. of torque
  • Designed to fit inside an 8” & 10″ diameter wheel
  • Available as a complete system, Aluminum Caliper, Ductile Cast Iron Bracket & Hub/Disc
  • Simple single piece caliper bridge design
  • Clockwise (CW) and counter clockwise (CCW) lever actuation
Specifications
Type
Mechanical Brake Caliper
Construction Material
Lightweight Cast Aluminum
Clamp Force (max.)
1450 lbs.
Maximum Lever Force @ 2.25″ Hole
240 lbs.
Lever Positions
0 – 180 degrees
Total Lining Area
2.9 sq. in.
Usable Lining Thickness Per Pad
0.125 in.
Lining Type
Organic
Mount
Floating w/ Bracket
Rotor Diameter
6.0
Rotor Thickness
0.188 in.
Finish
Natural, Paint or Anodize
Weight
N/A

M15 WM (10″ Wheels)

Mechanical Brake Caliper

Features
  • Capable of 1450 lbs. clamp force
  • Maximum of 3440 lbs. – in. of torque
  • Designed to fit inside a 10″ diameter wheel
  • Available as a complete system, Aluminum Caliper, Ductile Cast Iron Bracket & Hub/Disc
  • Simple single piece caliper bridge design
  • Clockwise (CW) and counter clockwise (CCW) lever actuation
Specifications
Type
Mechanical Brake Caliper
Construction Material
Lightweight Cast Aluminum
Clamp Force (max.)
1450 lbs.
Maximum Lever Force @ 3.0″ Hole
180 lbs.
Maximum Lever Force @ 4.0″ Hole
135 lbs.
Lever Positions
0 – 180 degrees
Total Lining Area
2.9 sq. in.
Usable Lining Thickness Per Pad
0.125 in.
Lining Type
Organic
Mount
Floating w/ Bracket
Rotor Diameter
7.875 in.
Rotor Thickness
0.188 in.
Finish
Natural, Paint or Anodize
Weight
N/A

M90

Mechanical Brake Caliper

Features
  • Capable of 9000 lbs. clamp force
  • One-piece cast iron housing
  • Efficient ball ramp actuation
  • Sealed actuation mechanism
  • High coefficient friction material
  • Durable, low cost mount with sealed bushings
  • Pads changed by removing one mount bolt
  • Capable of parking a wide range of vehicles
  • Clockwise (CW) and counter clockwise (CCW) lever actuation
Specifications
Type
Mechanical Brake Caliper
Construction Material
Cast Iron Housing
Clamp Force (max.)
9000 lbs.
Maximum Lever Force @ 4.0″ Hole
500 lbs.
Maximum Lever Force @ 3.325″ Hole
600 lbs.
Lever Positions
30 degree increments
Total Lining Area
9.0 sq. in.
Usable Lining Thickness Per Pad
0.125 in.
Lining Type
Organic or Sintered
Mount
Floating or Fixed
Rotor Diameter
10.0 – 18.0 in.
Rotor Thickness
0.375 – 1.0 in.
Finish
Natural or Paint
Weight
13.0 lbs. (5897 g)

M100 High Mount

Mechanical Brake Caliper

Features
  • Capable of 10000 lbs. clamp force
  • One-piece nodular cast iron housing
  • Self adjusting mechanism minimizes maintenance for pad wear
  • Quick change brake pads, retained by mount pins
  • Splined actuator lever can be positioned in 30° increments
  • Clockwise (CW) and counter clockwise (CCW) lever actuation
Specifications
Type
Mechanical Brake Caliper
Construction Material
Cast Iron Housing
Clamp Force (max.)
10000 lbs.
Maximum Lever Force @ 4.375″ Hole
450 lbs.
Maximum Lever Force @ 3.750″ Hole
525 lbs.
Lever Positions
30 degree increments
Lever Stroke for 10K Clamp
27 degrees
Total Lining Area
14.0 sq. in.
Usable Lining Thickness Per Pad
0.333 in.
Lining Type
Organic or Sintered
Mount
Floating or Fixed
Rotor Diameter
10.0 in. and up
Rotor Thickness
0.500, 0.626, & 0.750 in.
Finish
Natural or Paint
Weight
21.5 lbs. (9752 g)

M100 Low Mount

Mechanical Brake Caliper

Features
  • Capable of 10000 lbs. clamp force
  • One-piece nodular cast iron housing
  • Fully sealed ball ramp mechanism
  • Self adjusting mechanism minimizes maintenance for pad wear
  • Quick change brake pads, retained by mount pins
  • Splined actuator lever can be positioned in 30° increments
  • Supplied with mount bolts and sealed and lubricated slide pins
  • Clockwise (CW) and counter clockwise (CCW) lever actuation
Specifications
Type
Mechanical Brake Caliper
Construction Material
Cast Iron Housing
Clamp Force (max.)
10000 lbs.
Maximum Lever Force @ 4.375″ Hole
450 lbs.
Maximum Lever Force @ 3.750″ Hole
525 lbs.
Lever Positions
30 degree increments
Lever Stroke for 10K Clamp
27 degrees
Total Lining Area
14.8 sq. in.
Usable Lining Thickness Per Pad
0.470 in.
Lining Type
Organic or Sintered
Mount
Floating or Fixed
Rotor Diameter
10.0 – 20.0 in.
Rotor Thickness
0.750 – 1.0 in.
Finish
Natural or Paint
Weight
21.0 lbs. (9525 g)

M100SH Spring Applied Hydraulic Release (SAHR)

Mechanical Brake Caliper

Features
  • Capable of 10000 lbs. clamp force
  • One-piece nodular cast iron housing
  • Fully sealed ball ramp mechanism
  • Self adjusting mechanism minimizes maintenance for pad wear
  • Fast response-capable of 100 milliseconds
  • Chamber can be positioned in 90 degree increments.
  • Mechanical release using a wrench
  • Quick change brake pads, retained by mount pins
  • Clockwise (CW) and counter clockwise (CCW) lever actuation
Specifications
Type
Mechanical Brake Caliper
Construction Material
Cast Iron Housing
Clamp Force (max.)
10000 lbs.
Brake Hold Off
995 PSI Hydraulic
Maximum Chamber Rating
3675 PSI Hydraulic
Total Lining Area
14.8 sq. in.
Usable Lining Thickness Per Pad
0.470 in.
Lining Type
Organic or Sintered
Chamber Mount
90 degree increments
Rotor Diameter
10.0 in. and up
Rotor Thickness
0.500 – 0.750 in.
Finish
Natural or Paint
Weight
48.0 lbs. (21772 g)

M100SA Spring Applied Air or Hydraulic Release (SAAR/SAHR)

Mechanical Brake Caliper

Features
  • Capable of 10000 lbs. clamp force
  • One-piece nodular cast iron housing
  • Fully sealed ball ramp mechanism
  • Self adjusting mechanism minimizes maintenance for pad wear
  • Fast response-capable of 100 milliseconds
  • Chamber can be positioned in 90 degree increments.
  • Mechanical release using a wrench
  • Quick change brake pads, retained by mount pins
  • Clockwise (CW) and counter clockwise (CCW) lever actuation
Specifications
Type
Mechanical Brake Caliper
Construction Material
Cast Iron Housing
Clamp Force (max.)
10000 lbs.
Brake Hold Off
40 PSI Air or Hydraulic
Maximum Chamber Rating
125 PSI Air or Hydraulic
Total Lining Area
14.8 sq. in.
Usable Lining Thickness Per Pad
0.470 in.
Lining Type
Organic or Sintered
Chamber Mount
90 degree increments
Rotor Diameter
10.0 in. and up
Rotor Thickness
0.500 – 0.750 in.
Finish
Natural or Paint
Weight
36.5 lbs. (16556 g)

179MC

Flange Mount Master Cylinder

Features
  • Flange mount in .780 square hole with 3/4-16 nut
  • Compatible with any actuator rod which can be screwed into the 5/16-24 push rod
  • Piston housing made of porosity free extruded aluminum
  • Can be flange mounted vertically or horizontally
  • Built in pedal return spring under reservoir for compact size
  • Optional remote plastic reservoir available
  • Designed for banjo style seals or unrestricted flare
Specifications
Type
Single Circuit Bore
Piston Diameter
0.687 in. (17.45 mm)
Piston Stroke
0.558 in.
Maximum Input Force
400 PSI
Maximum PSI Output
900 PSI
Reservoir Volume
Optional
Return Spring Force
25 lbs.
Fluid Type
Brake Fluid (DOT 3, 4, 5, 5.1)
Mount
Flange Mount, 0.780 in. square hole
Finish
Natural, Paint or Anodize

1710MC

Flange Mount Master Cylinder

Features
  • Flange mount in .780 square hole with 3/4-16 nut
  • Compatible with any actuator rod which can be screwed into the 5/16-24 push rod
  • Piston housing made of porosity free extruded aluminum
  • Requires horizontal mounting
  • Built in pedal return spring under reservoir for compact size
  • Plastic reservoir has sight glass for checking fluid level
  • Designed for banjo style seals or unrestricted flare
Specifications
Type
Single Circuit Bore
Piston Diameter
0.687 in. (17.45 mm)
Piston Stroke
0.558 in.
Maximum Input Force
400 PSI
Maximum PSI Output
900 PSI
Reservoir Volume
4.0 cu. in.
Return Spring Force
25 lbs.
Fluid Type
Brake Fluid (DOT 3, 4, 5, 5.1)
Mount
Flange Mount, 0.780 in. square hole
Finish
Natural, Paint or Anodize

SIDEWINDER II TMC – 5/8″

Foot Pedal Master Cylinder

Features
  • Large volume dual circuit bore for front and rear brake actuation
  • Lightweight cast aluminum construction
  • Integral reservoir with visible level indication
  • Reversible reservoir mounting
  • Dust boot and threaded push rod
  • Threaded vented gasket style cap
Specifications
Type
Dual Circuit Bore
Piston Diameter
0.625 in. (15.875 mm)
Piston Area
0.307 sq. in.
Construction Material
Lightweight Cast Aluminum
Maximum Operating Pressure
2445 PSI
Reservoir Volume
3.5 cu. in.
Fluid Type
Brake Fluid (DOT 3, 4, 5, 5.1)
Fluid Outlet
M10 x 1.0 or M10 x 1.25 Banjo Fitting
Fluid Outlet Location
Bottom or Side
Operating Temperature Range
-40 F to 140 F
Pushrod Stroke (max.)
1.1 in.
Pushrod Thread
M8 x 1.25
Mount
3.508 in. (89.1 mm)
Switch Connector
Optional
Finish
Natural, Paint or Anodize
Weight
1.14 lbs. (517 g)

SIDEWINDER II TMC – 11/16″

Foot Pedal Master Cylinder

Features
  • Large volume dual circuit bore for front and rear brake actuation
  • Lightweight cast aluminum construction
  • Integral reservoir with visible level indication
  • Reversible reservoir mounting
  • Dust boot and threaded push rod
  • Threaded vented gasket style cap
Specifications
Type
Dual Circuit Bore
Piston Diameter
0.6875 in. (17.46 mm)
Piston Area
0.371 sq. in.
Construction Material
Lightweight Cast Aluminum
Maximum Operating Pressure
2445 PSI
Reservoir Volume
3.5 cu. in.
Fluid Type
Brake Fluid (DOT 3, 4, 5, 5.1)
Fluid Outlet
M10 x 1.0 or M10 x 1.25 Banjo Fitting
Fluid Outlet Location
Bottom or Side
Operating Temperature Range
-40 F to 140 F
Pushrod Stroke (max.)
1.1 in.
Pushrod Thread
M8 x 1.25
Mount
3.508 in. (89.1 mm)
Switch Connector
Optional
Finish
Natural, Paint or Anodize
Weight
1.14 lbs. (517 g)

SIDEWINDER II TMC – 3/4″

Foot Pedal Master Cylinder

Features
  • Large volume dual circuit bore for front and rear brake actuation
  • Lightweight cast aluminum construction
  • Integral reservoir with visible level indication
  • Reversible reservoir mounting
  • Dust boot and threaded push rod
  • Threaded vented gasket style cap
Specifications
Type
Dual Circuit Bore
Piston Diameter
0.750 in. (19.05 mm)
Piston Area
0.442 sq. in.
Construction Material
Lightweight Cast Aluminum
Maximum Operating Pressure
2445 PSI
Reservoir Volume
3.5 cu. in.
Fluid Type
Brake Fluid (DOT 3, 4, 5, 5.1)
Fluid Outlet
M10 x 1.0 or M10 x 1.25 Banjo Fitting
Fluid Outlet Location
Bottom or Side
Operating Temperature Range
-40 F to 140 F
Pushrod Stroke (max.)
1.1 in.
Pushrod Thread
M8 x 1.25
Mount
3.508 in. (89.1 mm)
Switch Connector
Optional
Finish
Natural, Paint or Anodize
Weight
1.14 lbs. (517 g)